Nissan Murano: Body Exterior, Doors, Roof & Vehicle Security / Security Control System :: Dtc/circuit Diagnosis

Additional Service When Replacing Control Unit. Ecm

Description Performing the following procedure can automatically activate recommunication of ECM and BCM, but only when the ECM is replaced with a new one*...

P1610 Lock Mode

DTC Description DTC DETECTION LOGICNOTE: If DTC P1610 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC Description...

Other information:

Nissan Murano (Z52) 2015-2024 Owners Manual: System maintenance

The sensor for the ICC system is located on the front of the vehicle. To keep the ICC system operating properly, be sure to observe the following: Always keep the sensor area clean. Do not strike or damage the areas around the sensor. Do not attach a sticker (including transparent material) or install an accessory near the sensor...

Nissan Murano (Z52) 2015-2024 Service Manual: System

System Description SYSTEM DIAGRAMINPUT/OUTPUT SIGNAL CHART Item Input signal to main power window and door lock/unlock switch Main power window and door lock/unlock switch function Actuator Encoder Encoder pulse signal Power window control Front power window motor Main power window and door lock/unlock switch Front power window motor LH UP/DOWN signal Power window and door lock/unlock switch RH Front power window motor RH UP/DOWN signal BCM RAP signal Rear power window switch Rear power window motor UP/DOWN signal Rear power window motor POWER WINDOW OPERATION Power window system is activated by the power window switches when ignition switch ON position or during the retained power operation after ignition switch OFF...