DTC DETECTION LOGIC
NOTE:
If DTC P1610 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC Description.
If DTC P1610 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC Description.
| DTC No. | CONSULT screen terms (Trouble diagnosis content) | DTC Detection Condition | |
|---|---|---|---|
| P1610 |
LOCK MODE (Lock mode) |
Diagnosis condition | When ignition switch is ON. |
| Signal (terminal) | — | ||
| Threshold | When ECM detects a communication malfunction between ECM and BCM 5 times or more | ||
| Diagnosis delay time | — | ||
POSSIBLE CAUSE
—
FAIL-SAFE
—
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Select “Self Diagnostic Result” mode of “ENGINE”.
Check DTC.
Is DTC detected?
YES>>Refer to Diagnosis Procedure.
NO>>Inspection End.
CHECK ENGINE START FUNCTION
CONSULT
Check that there are no DTC’s except for DTC P1610 detected.
If detected, erase the DTC after fixing.
Ignition switch OFF.
Contact the registered Intelligent Key backside to ignition switch and wait 5 seconds.
Ignition switch ON.
Ignition switch OFF and wait 5 seconds.
Repeat steps 3 and 5 twice (a total of 3 times).
Check that engine can start.
>>
Inspection End.
P1611 Id Discord, Immu-Ecm
Theremaybe one or two seatback pockets located on the back of the driver and passenger seats. The pockets can be used to store maps.
WARNING