Other information:
Description
For work procedure, refer to Work Procedure.BEFORE REPLACEMENTWhen replacing 3CH CAN gateway, save or print current vehicle specification (Type ID) with CONSULT configuration before replacement.NOTE:
If “Before Replace ECU” of “Read / Write Configuration” can not be used, use the “Manual Configuration” after replacing 3CH CAN gateway...
Removal and Installation
CAUTION:
Use care not to bend touch sensor.
Replace the back door touch sensor if it has been dropped or sustained an impact.
REMOVALRelease touch sensor clips using a suitable tool.
Disconnect the harness connector from the touch sensor and remove...