Nissan Murano: Brake Control System :: Automatic Emergency Braking / Preparation. Preparation

Nissan Murano (Z52) 2015-2024 Service Manual / Brakes / Brake Control System :: Automatic Emergency Braking / Preparation. Preparation

Special Service Tools

The actual shape of the tools may differ from those illustrated here.
Tool number (TechMate No.) Tool name		Description
— (1-20-2851-1) Radar Sensor Aiming kit*		Adjusting distance and radar sensors

NOTE:

* Tools 1–20–2721–1–IF, 1–20–2722–1–IF and J-50808 have been superseded and are no longer available, but may still be used for distance sensor alignment.

Precaution. Precautions

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...

System Description

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Additional Service When Replacing Sonar Control Unit

Description BEFORE REPLACEMENTWhen replacing sonar control unit, save or print current vehicle specification with CONSULT configuration before replacement.NOTE: If “Before Replace ECU” cannot be used, use the “After Replace ECU” or “Manual Configuration” after replacing sonar control unit...

Nissan Murano (Z52) 2015-2024 Service Manual: P0326 Knock Sensor

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detected condition P0326 KNOCK SENSOR 1 B1 (Knock/Combustion Vibration Sensor 1 Circuit Range/Performance Bank 1 or Single Sensor) Diagnosis condition During fuel cut after engine warm-up Signal Knock sensor Threshold When the ECM detects knocking during engine running more than the threshold value Diagnosis delay time 5 seconds POSSIBLE CAUSEHarness or connectors(The knock sensor circuit is open or shorted...