Exploded View
1.
Steering wheel
2.
Cover
3.
Steering switches
4.
Driver air bag module
A.
Driver air bag module bolt
Pawl
Removal and Installation
WARNING:
Before servicing the SRS, place the ignition switch in the OFF position, disconnect both battery terminals then wait at least three minutes...
Other information:
Work Flow
OVERALL SEQUENCEDETAILED FLOWGET INFORMATION FOR SYMPTOM
Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurs).
Check operation condition of the function that is malfunctioning...
DTC Description
DTC DETECTION LOGIC
ECM back up system does not function properly.
EEPROM (built-in microcomputer) system internal ECM does not function properly.
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0603
ECM BACK UP/CIRCUIT
[Internal Control Module Keep Alive Memory (KAM) Error]
Diagnosis condition
Ignition switch ON
Signal (terminal)
—
Threshold
ECM back up system does not function properly
Diagnosis delay time
—
P062F
CONTROL MODULE
(Internal control module EEPROM error)
Diagnosis condition
Start engine and let it idle
Signal (terminal)
—
Threshold
EEPROM (built-in microcomputer) system internal ECM does not function properly
Diagnosis delay time
—
POSSIBLE CAUSEDTC P0603
Harness or connectors
[ECM power supply circuit is open or shorted...