Nissan Murano: Srs Air Bag :: Removal and Installation / Front Passenger Air Bag Off Indicator
Removal and Installation
REMOVAL
Remove A/C switch assembly. Refer to Removal and Installation.
Remove screws and front passenger air bag OFF indicator.
INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation
OCCUPANT CLASSIFICATION SYSTEM CONTROL UNITWARNING:
Before servicing SRS, place the ignition switch in the OFF position, disconnect both battery terminals then wait at least three minutes...
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...
Other information:
Component Function Check
NOTE:
Before performing the diagnosis, check that the following are normal:
Battery saver output/power supply circuit
CHECK MOOD LAMP OPERATION
CONSULT
Ignition switch ON.
Select “SHIFT SPOT LAMP TEST” in “Active Test” mode of “BCM(INTELLIGENT KEY)”...
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen item
(Trouble diagnosis content) DTC detected condition
C119A
VACUUM SEN VOLT
(Vacuum sensor voltage)
Diagnosis condition
When ignition switch ON.
Signal (terminal)
Vacuum sensor (brake booster) signal
Threshold
When a malfunction is detected in supply power voltage of vacuum sensor...