Nissan Murano: Srs Air Bag :: Removal and Installation / Front Side Air Bag Module
Removal and Installation
The front side air bag module is part of the front seatback. For removal and installation of the front seatback, refer to Seatback.
Exploded View
1.
Side curtain air bag module
A.
Refer to Removal and Installation.
Front
NOTE:
LH side shown, RH side similar.
Removal and Installation
WARNING:
Before servicing the SRS, place the ignition switch in the OFF position, disconnect both battery terminals then wait at least three minutes...
Removal and Installation
The rear side air bag module is part of the second row seatback. For unit disassembly and assembly of the second row seat, refer to Seatback (LH) or Seatback (RH)...
Other information:
Exploded View
Transaxle assembly
Terminal cord assembly
Control valve
Bracket
O-ring
Oil strainer assembly
Oil pan gasket
Oil pan
Drain plug
Drain plug gasket
Magnet
Spring washer
Manual plate
Lip seal
Snap ring
Overflow plug
O-ring
: Always replace after every disassembly
: N·m (kg-m, ft-lb)
: N·m (kg-m, in-lb)
: Apply CVT fluid
: Apply petroleum jelly
Reduction gear assembly
Differential assembly
Clip
Lubrication tube
Baffle plate
Converter housing
Baffle plate
Snap ring
Drive sprocket
Driven sprocket
Oil pump chain
O-ring
Baffle plate (Chain cover)
Thrust bearing
Thrust bearing race
Dummy cover
Thrust washer
Chain guide
Bracket
Oil pump
O-ring
Transaxle case
: Always replace after every disassembly...
DTC Description
DESCRIPTIONITS COMMUNICATION
ITS communication is a multiplex communication system. This enables the system to transmit and receive large quantities of data at high speeds by connecting control units with two communication lines.
ITS communication lines adopt twisted-pair line style (two lines twisted) for noise immunity...