Nissan Murano: Dtc/circuit Diagnosis / Front Auxiliary Input Jacks

Nissan Murano (Z52) 2015-2024 Service Manual / Driver Information & Multimedia / Audio, Visual & Navigation System :: Navigation Without Bose / Dtc/circuit Diagnosis / Front Auxiliary Input Jacks

Diagnosis Procedure

AUX JACK

CHECK AUX JACK HARNESS CONTINUITY

  1. Ignition switch OFF.

  2. Disconnect AV control unit connector and front auxiliary input jacks connector.

  3. Check continuity between AV control unit connector and front auxiliary input jacks connector.

    AV control unit Front auxiliary input jacks Continuity
    Connector Terminal Connector Terminal
    M162 33 M222 3 Yes
    34 2
    54 1

  4. Check continuity between AV control unit connector and ground.

    AV control unit — Continuity
    Connector Terminal
    M162 34 Ground No
    54

Is the inspection result normal?

YES>>

Replace the front auxiliary input jacks. Removal and Installation.

NO>>

Repair or replace harness or connectors.

USB INTERFACES

CHECK USB 1 INTERFACE HARNESS CONTINUITY

  1. Ignition switch OFF.

  2. Disconnect front auxiliary input jacks connector and front auxiliary input jacks control unit connector.

  3. Check continuity between front auxiliary input jacks connector and front auxiliary input jacks control unit connector.

    Front auxiliary input jacks Front auxiliary input jacks control unit Continuity
    Connector Terminal Connector Terminal
    M223 7 M133 5 Yes
    9 7
    10 8
    11 9
    12 10

  4. Check continuity between front auxiliary input jacks connector and ground.

    Front auxiliary input jacks — Continuity
    Connector Terminal
    M223 9 Ground No
    11

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace harness or connectors.

CHECK USB 2 INTERFACE HARNESS CONTINUITY

  1. Disconnect front auxiliary input jacks connector and front auxiliary input jacks control unit connector.

  2. Check continuity between front auxiliary input jacks connector and front auxiliary input jacks control unit connector.

    Front auxiliary input jacks Front auxiliary input jacks control unit Continuity
    Connector Terminal Connector Terminal
    M224 13 M134 11 Yes
    15 13
    16 14
    17 15
    18 16

  3. Check continuity between front auxiliary input jacks connector and ground.

    Front auxiliary input jacks — Continuity
    Connector Terminal
    M224 15 Ground No
    17

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace harness or connectors.

CHECK USB INTERFACE HARNESS CONTINUITY

  1. Ignition switch OFF.

  2. Disconnect AV control unit connector and front auxiliary input jacks control unit connector.

  3. Check continuity between AV control unit connector and front auxiliary input jacks control unit connector.

    AV control unit Front auxiliary input jacks control unit Continuity
    Connector Terminal Connector Terminal
    M163 61 M135 17 Yes
    63 19
    64 20
    65 21
    66 22

  4. Check continuity between AV control unit connector and ground.

    AV control unit — Continuity
    Connector Terminal
    M163 63 Ground No
    65

Is the inspection result normal?

YES>>

Replace the front auxiliary input jacks. Removal and Installation.

NO>>

Repair or replace harness or connectors.

    Steering Switches

    Diagnosis Procedure CHECK STEERING WHEEL AUDIO CONTROL SWITCH RESISTANCE Ignition switch OFF. Disconnect combination switch connector. Check resistance between the terminals of combination switch connector...

    Symptom Diagnosis

    ..

    Other information:

    Nissan Murano (Z52) 2015-2024 Owners Manual: System maintenance


    CAUTION Do not use alcohol, benzine or thinner to clean the camera. This will cause discoloration. Do not damage the camera as the monitor screen may be adversely affected. If dirt, rain or snow accumulates on any of the cameras м, the MOD system may not operate properly...

    Nissan Murano (Z52) 2015-2024 Service Manual: Compression Pressure


    On-Vehicle Service CHECKING COMPRESSION PRESSURERun the engine until it reaches normal operating temperature. Turn the ignition switch to OFF. Release fuel pressure and leave the fuel pump electrically disconnected. Refer to Work Procedure. Remove all six spark plugs...

    Categories

    Front manual seat adjustment (if so equipped)

    Your vehicle seats can be adjusted manually. For additional information about adjusting the seats, refer to the steps outlined in this section.

    Forward and backward

    Nissan Murano. Front manual seat adjustment (if so equipped)

    read more

     
    Copyright © 2026 www.nimurano.com