Other information:
Abbreviations: I = Inspect and correct or replace as necessary, R =
Replace
NOTE:
(1) After 40,000 miles (64,000 km) or 48 months, inspect every 10,000
miles (16,000 km) or 12 months. Replace the drive belt if
found damaged.
(2) If operating mainly in dusty conditions, more frequent maintenance
may be required...
DTC Description
DESCRIPTIONCAN controller controls the communication of ITS communication signal and the error detection.DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
U1010-49
CONTROL UNIT (CAN)
[Control unit (CAN)]
Diagnosis condition
When ignition switch is ON...