Nissan Murano: Explanation of scheduled maintenance items / Emission control system maintenance

Nissan Murano 2015-2022 Owners Manual / Maintenance and schedules / Explanation of scheduled maintenance items / Emission control system maintenance

Drive belt*: Check engine drive belt for wear, fraying or cracking and for proper tension. Replace any damaged drive belt.

Engine air filter: Replace at specified intervals. When driving for prolonged periods in dusty conditions, check/replace the filter more frequently.

Engine coolant*: Replace coolant at the specified interval. When adding or replacing coolant, be sure to use only Genuine NISSAN Long Life Antifreeze/Coolant (blue) or equivalent with the proper mixture. (For additional information on the proper mixture for your area, refer to “Engine cooling system” in the “Do-it-yourself” section of this manual.)

NOTE:

Mixing any other type of coolant or the use of non-distilled water may reduce the recommended service interval of the coolant.

Engine oil and oil filter: Replace engine oil and oil filter at the specified intervals. For recommended oil grade and viscosity refer to “Recommended fluids/lubricants and capacities” in the “Technical and consumer information” section of this manual.

Engine valve clearance*: Inspect only if valve noise increase.Adjust valve clearance if necessary.

Evaporative emissions control vapor lines*: Check vapor lines for leaks or looseness. Tighten connections or replace parts as necessary.

Fuel filter*: Periodic maintenance is not required. (in-tank type filter)

Fuel lines*: Check the fuel hoses, piping and connections for leaks, looseness, or deterioration. Tighten connections or replace parts as necessary.

Spark plugs: Replace at specified intervals. Install new plugs of the same type as originally equipped.

    Explanation of scheduled maintenance items

    The following descriptions are provided to give you a better understanding of the scheduled maintenance items that should be regularly checked or replaced...

    Chassis and body maintenance

    Brake lines and cables: Visually inspect for proper installation. Check for chafing, cracks, deterioration, and signs of leaking. Replace any deteriorated or damaged parts immediately...

    Other information:

    Nissan Murano 2015-2022 Owners Manual: Attaching the center seat belt


    Always be sure the center seat belt connector tongue and connector buckle are attached. Disconnect only when folding down the rear seat. To connect the buckle: Pull out the connector tongue from the retractor base . Pull out the seat belt tongue from the retractor base ...

    Nissan Murano 2015-2022 Owners Manual: RCTA system limitations


    WARNING Listed below are the system limitations for the RCTA system. Failure to operate the vehicle in accordance with these system limitations could result in serious injury or death. Always check surroundings and turn to check what is behind you before backing up...

    Categories

    Unfastening the seat belts. Checking seat belt operation

    Unfastening the seat belts

    Nissan Murano. Unfastening the seat belts. Checking seat belt operation

    To unfasten the seat belt, press the button on the buckle Nissan Murano. Unfastening the seat belts. Checking seat belt operation. The seat belt automatically retracts.

    read more

     
    Copyright © 2022 www.nimurano.com