Other information:
To cancel the preset speed, use one of the
following methods:
Push the CANCEL switch. The set vehicle
speed indicator will go out.
Tap the brake pedal. The set vehicle
speed indicator will go out.
If the Cruise Control Alerts are enabled
in the Driver Assistance menu, the
“Cruise ON: Press SET to engage speed
control” message will reappear in the
vehicle information display to let you
know the cruise control system is still
on if you set the target speed again...
DTC Description
IPDM E/R confirms the shift position with the following signals:
Transmission range switch
Shift position signal from BCM (CAN)
DTC DETECTION LOGICNOTE:
If DTC B210F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000...