Nissan Murano: Ventilation, Heater & Air Conditioner / Heater & Air Conditioning Control System :: Dtc/circuit Diagnosis

System Setting

Temperature Setting Trimmer (Front) DESCRIPTIONIf the temperature felt by the customer is different from the front air flow temperature controlled by the temperature setting, the A/C auto amp...

U1000 Can Comm Circuit

DTC Description CAN (Controller Area Network) is a serial communication system for real time application. It is an on-Nissan Murano vehicle multiplex communication system with high data communication speed and excellent error detection ability...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: P0706 Transmission Range Sensor a

DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0706 T/M RANGE SENSOR A (Transmission Range Sensor A Circuit Range/Performance) Diagnosis condition TCM power supply voltage: More than 11 V Signal Transmission range switch signal Threshold All range signals stay OFF Diagnosis delay time Maintained for 30 seconds POSSIBLE CAUSE Harness or connector (Open circuit between ignition switch and transmission range switch/open circuit between transmission range switch and TCM) Transmission range switch Control cable Harness or connector (CAN communication line is error)FAIL-SAFE Shift position indicator on combination meter is not displayed Selector shock is large Start is slow Acceleration is slow Lock-up is not performed DTC Confirmation Procedure PREPARATION BEFORE WORK If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at least 10 seconds, then perform the next test...

Nissan Murano (Z52) 2015-2024 Service Manual: The Meter Control Switch Is Inoperative

Diagnosis Procedure The meter control switches are inoperative when pressed.CHECK METER CONTROL SWITCH Check the meter control switch. Refer to Component Inspection. Is the inspection result normal? YES>> GO TO 2. NO>> Replace meter control switch...