Nissan Murano: Heater & Air Conditioning Control System :: Dtc/circuit Diagnosis / Power Supply and Ground Circuit

B27b0 A/c Auto Amp.

DTC Description DTC DETECTION LOGICNOTE: If DTC is displayed along with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC Description...

A/c Auto Amp.

Diagnosis Procedure CHECK FUSE Check fuses [No. 14 and 29, located in the fuse block (J/B)]. NOTE: Refer to Terminal Arrangement. Is the inspection result normal? YES>> GO TO 2...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Nissan Vehicle Immobilizer System-Nats

System Description SYSTEM DIAGRAMINPUT SIGNAL AND OUTPUT SIGNAL CHART Component Signal description ECM Mainly transmits the following signal to BCM and combination meter via CAN communication. Engine status signal Mainly receives the following signal from BCM via CAN communication...

Nissan Murano (Z52) 2015-2024 Service Manual: System Initialization

Description Always perform the initialization when the battery terminal is disconnected or the driver seat control unit is replaced.The entry/exit assist function will not operate normally if no initialization is performed. Work Procedure INITIALIZATION PROCEDURECHOOSE METHOD There are two initialization methods...