Nissan Murano: Dtc/circuit Diagnosis / Side Radar (rear Right) (side Radar Rh)
Nissan Murano (Z52) 2015-2024 Service Manual / Cruise Control & Driver Assistance / Driver Assistance System :: Driver Assistance System / Dtc/circuit Diagnosis / Side Radar (rear Right) (side Radar Rh)
- C1b50-49 Side Radar Malfunction
- C1b51-16 Blind Spot Warning Indicator Short Circuit
- C1b52-17 Blind Spot Warning Indicator Open Circuit
- C1b55-00 Radar Blockage
- U0104-82 Adas Can 1
- U1000-01 Can Comm Circuit
- U1010-49 Control Unit (can)
U1321-55 Configuration
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
U1321-55
CONFIGURATION DATA ERROR
(Configuration data error)
Diagnosis condition
When ignition switch is ON...
C1b50-49 Side Radar Malfunction
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
C1B50-49
SIDE RDR MALFUNCTION
(Side radar malfunction)
Diagnosis condition
When ignition switch is ON...
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: Configuration (audio Unit)
Description Vehicle specification needs to be written with CONSULT because it is not written after replacing audio unit.Configuration has three functions as follows: Function Description "Before Replace ECU" Reads the Nissan Murano vehicle configuration of current audio unit...
Nissan Murano (Z52) 2015-2024 Owners Manual: Break-in schedule
CAUTION During the first 1,200 miles (2,000 km), follow these recommendations to obtain maximum engine performance and ensure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in shortened engine life and reduced engine performance...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- Rear bench seat adjustment
- All-Wheel Drive (AWD) (if so equipped)
- Shift lock release
- New on site
- Most important about car
LATCH (Lower Anchors and Tethers for CHildren) system
LATCH system lower anchor locations - bench seat
Your vehicle is equipped with special anchor points that are used with LATCH system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint unless the combined weight of the child and child restraint exceeds 65 lbs. (29.5 kg). If the combined weight of the child and child restraint is greater than 65 lbs. (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.
Copyright © 2026 www.nimurano.com