Nissan Murano: Cruise Control & Driver Assistance / Driver Assistance System :: Driver Assistance System

Nissan Murano (Z52) 2015-2024 Service Manual / Cruise Control & Driver Assistance / Driver Assistance System :: Driver Assistance System

Removal and Installation. Adas Control Unit 2

Removal and Installation REMOVALNOTE: Before replacing ADAS control unit, perform “Before Replace ECU” of “Read / Write Configuration” to save or print current Nissan Murano vehicle specification...

Precaution. Precautions

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Rear Wheel Sensor


Exploded View RH Side 1. Rear wheel sensor A. Rear wheel sensor bracket B. Clip C. Harness connector D. Refer to Removal and Installation. Front LH Side 1. Rear wheel sensor A. Harness connector B. Clip C. Rear wheel sensor bracket D...

Nissan Murano (Z52) 2015-2024 Service Manual: U0428 Steering Angle Sensor


DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition U0428 ST ANGLE SENSOR CALIBRATION (Steering angle sensor calibration) Diagnosis condition When ignition switch is ON Signal (terminal) — Threshold — Diagnosis delay time — POSSIBLE CAUSE Neutral position adjustment of steering angle sensor is not complete Steering angle sensor FAIL-SAFE Predicted course line is not displayed MOD (Moving Object Detection) function is stopped DTC Confirmation Procedure CHECK DTC PRIORITY If DTC U0428 is displayed with DTC U1232, first perform the diagnosis for DTC U1232...

Categories

read more

 
Copyright © 2026 www.nimurano.com