Nissan Murano: Transmission & Driveline / Driveline :: Rear Final Drive: R145

Nissan Murano (Z52) 2015-2024 Service Manual / Transmission & Driveline / Driveline :: Rear Final Drive: R145

Service Data and Specifications (sds). Service Data and Specifications (sds)

General Specifications Applied model Axle AWD Engine VQ35DE Transaxle CVT Propeller shaft model C-CVJ-C Number of joints 3 Joint type 1st joint Universal (Shell type) 2nd joint CVJ type 3rd joint Universal (Shell type) Coupling method Transfer side Flange type Rear final drive side Flange type Shaft length 1st (Spider to CVJ joint center) 1265 mm (49...

Precaution. Precautions

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...

Other information:

Nissan Murano (Z52) 2015-2024 Owners Manual: Operating vehicle-to-vehicle distance control mode


To turn on the cruise control, quickly push and release the CRUISE ON/OFF switch . The ICC system ON indicator (gray), set distance indicator and set vehicle speed indicator come on in a standby state for setting. If the Cruise Control Alerts are enabled in the Driver Assistance menu, then the “Cruise ON: Press SET to engage speed and distance control” message will appear in the vehicle information display...

Nissan Murano (Z52) 2015-2024 Service Manual: Vin Registration


Description VIN Registration is an operation to register VIN in ECM. It must be performed each time ECM is replaced.NOTE: Accurate VIN which is registered in ECM may be required for Inspection & Maintenance (I/M). For details, refer to Work Procedure...

Categories

Fuel gauge

Nissan Murano. Fuel gauge

The gauge indicates the approximate fuel level in the tank.

The gauge may move slightly during braking, turning, acceleration, or going up or down hills.

The gauge needle returns to 0 (Empty) after the ignition switch is placed in the OFF position.

read more

 
Copyright © 2026 www.nimurano.com