Nissan Murano: Automatic Back Door Operation Does Not Operate / Intelligent Key

Nissan Murano (Z52) 2015-2024 Service Manual / Body Exterior, Doors, Roof & Vehicle Security / Door & Lock :: Symptom Diagnosis / Automatic Back Door Operation Does Not Operate / Intelligent Key

Diagnosis Procedure

Automatic back door open/close function does not operate using Intelligent Key.

NOTE:

Automatic back door open/close operation condition is extremely complicated. During operating confirmations, reconfirm the list above twice in order to ensure proper operation. Refer to System Description.

CHECK DTC WITH AUTOMATIC BACK DOOR CONTROL MODULE

Check that DTC is not detected with automatic back door control module.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Perform trouble diagnosis relevant to DTC indicated.

CHECK DTC WITH BCM

Check that DTC is not detected with BCM.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Perform trouble diagnosis relevant to DTC indicated.

CHECK REMOTE KEYLESS ENTRY FUNCTION

Check remote keyless entry function.

Does door lock/unlock with Intelligent Key button?

YES>>

GO TO 4.

NO>>

Refer to Component Function Check.

REPLACE AUTOMATIC BACK DOOR CONTROL MODULE

  1. Replace automatic back door control module. Refer to Removal and Installation.

  2. Confirm the operation after replacement.

Is the result normal?

YES>>

Inspection End.

NO>>

Check intermittent incident. Refer to Intermittent Incident.

    Automatic Back Door Switch

    Diagnosis Procedure Automatic back door open/close function does not operate using automatic back door switch.NOTE: Automatic back door open/close operation condition is extremely complicated...

    Open/closure Function

    Diagnosis Procedure Back door auto closure function does not operate when back door opening and closing operations are performed.CHECK DTC WITH AUTOMATIC BACK DOOR CONTROL MODULE Check that DTC is not detected with automatic back door control module...

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: Ldw


    System Description SYSTEM DIAGRAMADAS CONTROL UNIT INPUT/OUTPUT SIGNAL ITEMInput Signal Item Transmit unit Signal name Description ABS actuator and electric unit (control unit) CAN communication Nissan Murano Vehicle speed signal (ABS) Receives wheel speeds of four wheels BCM CAN communication Turn indicator signal Receives an operational state of the turn signal lamp and the hazard lamp Combination meter CAN communication System selection signal Receives a selection state of each item in “Driver Assistance” selected with the Nissan Murano vehicle information display Lane camera unit ITS communication Detected lane condition signal Receives detection results of lane marker Output Signal Item Reception unit Signal name Description Combination meter CAN communication Lane departure warning lamp signal Transmits a lane departure warning lamp signal to turn ON the lane departure warning lamp Lane camera unit ITS communication Nissan Murano Vehicle speed signal Transmits a vehicle speed calculated by the ADAS control unit Turn indicator signal Transmits a turn indicator signal received from BCM Warning system buzzer Warning buzzer signal Activates warning system buzzer...

    Nissan Murano (Z52) 2015-2024 Service Manual: Cooling Fan


    Exploded View 1. Radiator core support 2. Fan 3. Fan motor 4. Fan shroud and motor assembly 5. Isolator (lower) 6. Grommet Front Removal and Installation WARNING: Do not remove the radiator cap when the engine is hot...

    Categories

    Unfastening the seat belts. Checking seat belt operation

    Unfastening the seat belts

    Nissan Murano. Unfastening the seat belts. Checking seat belt operation

    To unfasten the seat belt, press the button on the buckle Nissan Murano. Unfastening the seat belts. Checking seat belt operation. The seat belt automatically retracts.

    read more

     
    Copyright © 2026 www.nimurano.com