Nissan Murano: Road Wheels & Tires :: Symptom Diagnosis / Low Tire Pressure Warning Lamp Stays on
Diagnosis Procedure
CHECK BCM CONNECTORS
-
Ignition switch OFF.
-
Disconnect BCM connectors.
-
Check terminals for damage or loose connections.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace damaged connectors.
BCM POWER SUPPLY AND GROUND CIRCUITS
Check BCM power supply and ground circuits. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
Replace BCM. Refer to Removal and Installation.
NO>>
Repair BCM circuits.
Diagnosis Procedure
NOTE:
The Signal Tech II Tool [– (J-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information...
Diagnosis Procedure
When the ignition switch is placed ON, the low tire pressure warning lamp blinks. And then 1 minute later, low tire pressure warning lamp turns ON...
Other information:
Diagnosis Procedure
Symptom
Insufficient cooling.
No cool air comes out. (Air flow volume is normal.)
NOTE:
Perform self-diagnoses with CONSULT before performing symptom diagnosis. If any DTC is detected, perform the corresponding diagnosis.
CHECK MAGNET CLUTCH OPERATION
Ignition switch ON...
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collisions...
Categories

The autolight system allows the headlights
to turn on and off automatically. The autolight
system can:
Turn on the headlights, front parking,
tail, license plate and instrument panel
lights automatically when it is dark.
Turn off all the lights (except daylight
running lights) when it is light.
Keep all the lights on for a period of time
after you place the ignition switch in the
OFF position and all doors are closed.
read more