Nissan Murano: Automatic Back Door Operation Does Not Operate / Automatic Back Door Switch
Automatic back door open/close function does not operate using automatic back door switch.
NOTE:
Automatic back door open/close operation condition is extremely complicated. During operating confirmations, reconfirm the list above twice in order to ensure proper operation. Refer to System Description.
CHECK AUTOMATIC BACK DOOR SWITCH
Check automatic back door switch.
Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
REPLACE AUTOMATIC BACK DOOR CONTROL MODULE
-
Replace automatic back door control module. Refer to Removal and Installation.
-
Confirm the operation after replacement.
Is the result normal?
YES>>Inspection End.
NO>>Check intermittent incident. Refer to Intermittent Incident.
All Switches
Diagnosis Procedure
Automatic back door open/close function does not operate using all switches.NOTE:
Automatic back door open/close operation condition is extremely complicated...
Intelligent Key
Diagnosis Procedure
Automatic back door open/close function does not operate using Intelligent Key.NOTE:
Automatic back door open/close operation condition is extremely complicated...
Other information:
Nissan Murano (Z52) 2015-2024 Owners Manual: Uniform tire quality grading
DOT (Department of Transportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width...
Nissan Murano (Z52) 2015-2024 Service Manual: Intelligent Cruise Control System Symptoms
Symptom Table Symptoms Reference page Operation MAIN switch does not turn ON Diagnosis Procedure MAIN switch does not turn OFF ICC system cannot be set (MAIN switch turns ON/OFF) Diagnosis Procedure CANCEL switch does not function Diagnosis Procedure Resume does not function Set speed does not increase Set distance to a Nissan Murano vehicle ahead cannot be changed ICC is not canceled when the CVT selector lever is in “N” position Diagnosis Procedure Display/Chime ICC system display does not appear System Description Chime does not sound Diagnosis Procedure Control Driving force is hunting Diagnosis Procedure Function to detect a Nissan Murano vehicle ahead System frequently cannot detect a vehicle ahead Diagnosis Procedure Distance to detect a Nissan Murano vehicle ahead is short System misidentifies a vehicle even though there is no vehicle ahead Adjust distance sensor (ICC sensor) alignment: Refer to Work Procedure ...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- Power Steering Fluid (PSF)
- All-Wheel Drive (AWD) (if so equipped)
- Indicator lights
- New on site
- Most important about car
Autolight system
The autolight system allows the headlights to turn on and off automatically. The autolight system can:
Turn on the headlights, front parking, tail, license plate and instrument panel lights automatically when it is dark. Turn off all the lights (except daylight running lights) when it is light. Keep all the lights on for a period of time after you place the ignition switch in the OFF position and all doors are closed.