Nissan Murano: Door & Lock :: Symptom Diagnosis / Automatic Back Door Operation Does Not Operate

Intelligent Key Button Operation Has Poor Range (one Key)

Diagnosis Procedure Intelligent Key button operation has poor range. (One Intelligent Key has the symptom, other keys operate normally.)SYMPTOM TABLE (ONE INTELLIGENT KEY HAS THE SYMPTOM, OTHER KEYS OPERATE NORMALLY) Door lock operation (remote keyless entry) Door lock operation (request switch) or back door open operation (opener switch of back door panel) Engine started with ignition switch operation (Intelligent Key is within the detection area of inside key antenna) Engine started with ignition switch operation (registered Intelligent Key placed next to ignition switch) Poor range OK OK OK DIAGNOSIS PROCEDURERefer to Diagnosis Procedure...

All Switches

Diagnosis Procedure Automatic back door open/close function does not operate using all switches.NOTE: Automatic back door open/close operation condition is extremely complicated...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Door Hinge

Removal and Installation REMOVALRemove front door assembly. Refer to Removal and Installation. Remove front door hinge bolts (body side) and front door hinge.INSTALLATIONInstallation is in the reverse order of removal.CAUTION: Tighten nuts/bolts to specified torque...

Nissan Murano (Z52) 2015-2024 Service Manual: P0182 Ftt Sensor

DTC Description DTC DETECTION LOGIC An excessively low voltage from the sensor is sent to ECM. An excessively high voltage from the sensor is sent to ECM. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0182 FTT_SEN/CIRCUIT (Fuel temperature sensor “A” circuit low) Diagnosis condition Ignition switch ON Signal (terminal) Voltage signal transmitted from fuel tank temperature sensor to ECM Threshold An excessively low voltage from the sensor is sent to ECM Diagnosis delay time — P0183 FTT_SEN/CIRCUIT (Fuel temperature sensor “A” circuit high) Diagnosis condition Ignition switch ON Signal (terminal) Voltage signal transmitted from fuel tank temperature sensor to ECM Threshold An excessively high voltage from the sensor is sent to ECM Diagnosis delay time — POSSIBLE CAUSEP0182 Harness or connectors (The sensor circuit is open or shorted...