Nissan Murano: Removal and Installation / Front Door Speaker
Removal and Installation
REMOVAL
Remove front door finisher. Refer to Removal and Installation.
Disconnect the harness connector (A) from front door speaker and remove screws to remove front door speaker (1).

INSTALLATION
Installation is in the reverse order of removal.
Removal and Installation
REMOVALRemove front pillar finisher. Refer to Removal and Installation.
Remove screws (A) and remove front tweeter (1) from front pillar finisher (2)...
Exploded View
1.
Subwoofer clamp
2.
Subwoofer
3.
Spare tire
Front
Removal and Installation
REMOVALRemove storage box lid. Refer to Removal and Installation...
Other information:
Component Function Check
COMBINATION METER INPUT SIGNAL
CONSULT
Select “Data Monitor” mode of “METER/M&A”.
Select “FUEL METER”.
Compare the “FUEL METER” value and the fuel gauge reading of the combination meter. Fuel gauge and data monitor indications should be close...
DTC Description
DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC Detection Condition
B2556
PUSH-BTN IGN SW
(Push-button ignition switch)
Diagnosis condition
When ignition switch ON.
Signal (terminal)
—
Threshold
BCM detects the ignition switch stuck at ON for 100 seconds or more
Diagnosis delay time
—
POSSIBLE CAUSE
Push-button ignition switch
BCM
Harness or connector
(Ignition switch circuit is shorted...