Nissan Murano: Heater & Air Conditioning Control System :: Removal and Installation / Door Motor

Refrigerant Pressure Sensor

R..

Mode Door Motor

Removal and Installation REMOVALRemove the center console side finisher (LH). Refer to Exploded View. Remove the instrument lower panel LH. Refer to Removal and Installation...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: P0454 Evap Control System Pressure Sensor

DTC Description DTC DETECTION LOGICECM detects a sloshing signal from the EVAP control system pressure sensor. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0454 EVAP SYS PRES SEN (Evaporative emission system pressure sensor/switch range/performance) Diagnosis condition — Signal (terminal) Voltage signal transmitted from EVAP control system pressure sensor to ECM Threshold ECM detects a sloshing signal from the EVAP control system pressure sensor Diagnosis delay time — POSSIBLE CAUSE Harness or connectors (EVAP control system pressure sensor circuit is shorted...

Nissan Murano (Z52) 2015-2024 Service Manual: Shipping Mode Cancel Operation

Work Procedure SHIPPING MODE CANCEL OPERATION Ignition switch OFF. Press in (turn on) the extended storage switch. Refer to How To Check. Ignition switch ON. Ignition switch OFF and wait at least 2 seconds. NOTE: Pressing in the extended storage switch moves the mode from Shipping to Normal...