For removal and installation of the refrigerant pressure sensor. Refer to Removal and Installation.
Other information:
On-vehicle Service
Check axle and suspension parts for excessive play, wear or damage.
Move the wheel as shown to check for excessive play.
Inspection
Move the wheel hub and bearing in an axial direction by hand to verify that looseness of wheel hub and bearing exists...
DTC Description
DTC DETECTION LOGICMalfunction has occurred inside AWD control unit. DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detecting condition
C1201
CONTROLLER FAILURE
(Control unit failure)
Diagnosis condition
Ignition switch: ON
Signal
—
Threshold
—
Diagnosis delay time
—
POSSIBLE CAUSEInternal malfunction of AWD control unitFAIL-SAFEFront-wheel drive or shifts to 4-wheel drive (rear-wheels still have some driving torque)...