Other information:
The panoramic sunshade operates when
the ignition switch is in theONposition.The
sunshade switch is located near the roof
console. When opening or closing the sunshade
the switch need not be held.
To open the sunshade:
To fully open the sunshade, push the
switch toward the open position ...
Description
This procedure must be performed after replacement of a tire pressure sensor or BCM.
Work Procedure
TPMS ID registration can be performed using one of the following procedures:
Transmitter Activation tool [KV48105501 (J-45295-A)] using CONSULT (preferred method)
Signal Tech II tool [– (J-50190)] with CONSULT (preferred method)
Signal Tech II tool [– (J-50190)] without CONSULT
CONSULT only
TPMS REGISTRATION WITH TRANSMITTER ACTIVATION TOOL [KV48105501 (J-45295-A)]CONSULT
Ignition switch ON...