Nissan Murano: Brake System :: Basic Inspection / Rear Disc Brake. Disc Brake Rotor
Inspection
Check for uneven wear of the disc brake rotor using a micrometer. Replace the disc brake rotor if the thickness is below the wear limit.

| Thickness variation (measured at 8 positions) |
: Refer to Rear Disc Brake. |
Inspection
Check for uneven wear of the disc brake rotor using a micrometer. Replace the disc brake rotor if the thickness is below the wear limit. Thickness variation (measured at 8 positions)
: Refer to Front Disc Brake...
Other information:
Exploded View
1.
Quarter glass molding
Clip
Removal and Installation
REMOVALCAUTION:
Disengage the clips slowly and carefully.
Release quarter glass molding clips, using suitable tool.
Remove quarter glass molding from Nissan Murano vehicle...
DTC Description
NOTE:
The Signal Tech II Tool [– (J-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information.
Activate and display TPMS sensor IDs
Display tire pressure reported by the TPMS sensor
Read TPMS DTCs
Register TPMS sensor IDs
DTC DETECTION LOGIC DTC No...