Nissan Murano: Brakes / Brake System :: Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting
Use the chart below to find the cause of the symptom. If necessary, repair or replace these parts.
| Reference page | Inspection , Inspection | Inspection, Inspection, Inspection and Adjustment, Inspection and Adjustment | Inspection, Inspection, Inspection and Adjustment, Inspection and Adjustment | Inspection, Inspection | InspectionInspection | Inspection, Inspection | Inspection, Inspection | Inspection, Inspection, Inspection and Adjustment, Inspection and Adjustment | NVH Troubleshooting Chart (AWD) | Symptom Table (AWD) |
NVH Troubleshooting Chart NVH Troubleshooting Chart |
NVH Troubleshooting Chart NVH Troubleshooting Chart |
NVH Troubleshooting Chart | NVH Troubleshooting Chart |
NVH Troubleshooting Chart NVH Troubleshooting Chart (AWD) |
NVH Troubleshooting Chart | ||||
|
Possible cause and SUSPECTED PARTS |
Brake pad - damaged | Brake pad - uneven wear | Shims damaged | Disc brake rotor imbalance | Disc brake rotor damage | Disc brake rotor runout | Disc brake rotor deformation | Disc brake rotor deflection | Disc brake rotor rust | Disc brake rotor thickness variation | PROPELLER SHAFT | DIFFERENTIAL | AXLE | SUSPENSION | TIRE | WHEEL | DRIVE SHAFT | STEERING | ||
| Symptom | BRAKE | Noise | × | × | × | × | × | × | × | × | × | × | × | |||||||
| Shake | × | × | × | × | × | × | × | × | ||||||||||||
| Shimmy, Shudder | × | × | × | × | × | × | × | × | × | × | × | × | ||||||||
×: Applicable
Brake System :: Preparation. Preparation
Special Service Tool
The actual shape of the tools may differ from those illustrated here.
Tool number
(TechMate No.)
Tool name Description
—
(J-46532)
Brake height tool
Measuring brake pedal height
38-PFM92
( — )
ProCut™ PFM Series Lathe
Refinishing rotors
Commercial Service Tool
Tool name Description
1...
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: L Terminal Circuit (short)
Diagnosis Procedure CHECK “L” TERMINAL CIRCUIT (SHORT) Ignition switch OFF. Disconnect generator connector. Ignition switch ON. Does charge warning lamp illuminate? YES>> GO TO 2. NO>> Refer to Work Flow (With 165-DSS-5000P), or (Without 165-DSS-5000P)...
Nissan Murano (Z52) 2015-2024 Service Manual: Front Grille
Exploded View 1. Front grille 2. Front emblem 3. Front camera (if equipped) 4. Core support cover Clip Pawl Removal and Installation REMOVALRemove the core support cover. Release hood switch harness clip from upper radiator air guide and disconnect harness connector from hood switch...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- Turning the AEB system on/off
- All-Wheel Drive (AWD) (if so equipped)
- Checking engine oil level
- New on site
- Most important about car
LATCH (Lower Anchors and Tethers for CHildren) system
LATCH system lower anchor locations - bench seat
Your vehicle is equipped with special anchor points that are used with LATCH system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint unless the combined weight of the child and child restraint exceeds 65 lbs. (29.5 kg). If the combined weight of the child and child restraint is greater than 65 lbs. (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.
