Other information:
To cancel the preset speed, use one of the
following methods:
Push the CANCEL switch. The set vehicle
speed indicator will go out.
Tap the brake pedal. The set vehicle
speed indicator will go out.
If the Cruise Control Alerts are enabled
in the Driver Assistance menu, the
“Cruise ON: Press SET to engage speed
control” message will reappear in the
vehicle information display to let you
know the cruise control system is still
on if you set the target speed again...
DTC Description
DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC Detection Condition
U1010
CONTROL UNIT(CAN)
(Control unit CAN)
Diagnosis condition
When ignition switch ON.
Signal (terminal)
—
Threshold
—
Diagnosis delay time
2 seconds or more
POSSIBLE CAUSE
IPDM E/R
FAIL-SAFE—
DTC Confirmation Procedure
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON and wait for 2 seconds or more...