Nissan Murano: System Description / Diagnosis System (audio Unit)
Description
Refer to Description.
On Board Diagnosis Function
Refer to On Board Diagnosis Function.
CONSULT Function
Refer to CONSULT Function.
CONSULT Function
CONSULT FUNCTIONSCONSULT performs the following functions via communication with the around view monitor control unit. Direct Diagnostic Mode Description
ECU Identification
The around view monitor control unit part number is displayed...
Other information:
System Description
SYSTEM DIAGRAM
This function maintains brake fluid pressure so that the vehicle does not move backward even if brake pedal is released to depress accelerator pedal to start the Nissan Murano vehicle while it is stopped on an uphill slope by depressing brake pedal...
Diagnosis Procedure
CHECK STEERING WHEEL AUDIO CONTROL SWITCH RESISTANCE
Ignition switch OFF.
Disconnect combination switch connector.
Check resistance between the terminals of combination switch connector.
Combination switch Condition
Resistance (Ω)
(Approx...
Categories

LATCH system lower anchor locations -
bench seat
Your vehicle is equipped with special anchor
points that are used with LATCH system
compatible child restraints. This system
may also be referred to as the ISOFIX
or ISOFIX compatible system. With this system,
you do not have to use a vehicle seat
belt to secure the child restraint unless the
combined weight of the child and child restraint
exceeds 65 lbs. (29.5 kg). If the combined
weight of the child and child restraint
is greater than 65 lbs. (29.5 kg), use the vehicle’s
seat belt (not the lower anchors) to
install the child restraint. Be sure to follow
the child restraint manufacturer’s instructions
for installation.
read more