Nissan Murano: System Description / Diagnosis System (around View Monitor Control Unit)

Nissan Murano (Z52) 2015-2024 Service Manual / Driver Information & Multimedia / Audio, Visual & Navigation System :: Intelligent Around View Monitor with Display Audio System / System Description / Diagnosis System (around View Monitor Control Unit)

CONSULT Function

CONSULT FUNCTIONS

CONSULT performs the following functions via communication with the around view monitor control unit.

Direct Diagnostic Mode	Description
ECU Identification	The around view monitor control unit part number is displayed.
Self Diagnostic Result	The around view monitor control unit self diagnostic results are displayed.
Data Monitor	The around view monitor control unit input/output data is displayed in real time.
Work support	The settings for around view monitor control unit functions can be changed.
Configuration	The Nissan Murano vehicle specification can be read and saved. The vehicle specification can be written when replacing around view monitor control unit.
CAN Diag Support Mntr	The result of transmit/receive diagnosis of CAN communication is displayed.

ECU IDENTIFICATION

The part number of around view monitor control unit is displayed.

SELF DIAGNOSTIC RESULT

Refer to DTC Index .

DATA MONITOR

NOTE:

The following table includes information (items) inapplicable to this Nissan Murano vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor Item	Description
ST ANGLE SENSOR SIGNAL [On/Off]	Indicates condition of steering angle sensor signal.
REVERSE SIGNAL [On/Off]	Indicates selector lever position.
Nissan Murano Vehicle SPEED SIGNAL [mph/km/h]	Indicates condition of vehicle speed signal.
CAMERA SWITCH SIGNAL [On/Off]	Indicates condition of camera switch signal.
CAMERA OFF SIGNAL [On/Off]	Indicates condition of camera OFF signal.
ST ANGLE SENSOR TYPE [Absolute]	Indicates steering angle sensor type.
STEERING GEAR RATIO TYPE [Type 0]	Indicates steering gear ratio type.
STEERING POSITION [LHD/RHD]	Indicates LH or RH drive type.
REAR CAMERA IMAGE SIGNAL [OK/NG]	Indicates condition of camera image signal.
F-CAMERA IMAGE SIGNAL [OK/NG]	Indicates condition of camera image signal.
DR-SIDE CAMERA IMAGE SIG [OK/NG]	Indicates condition of camera image signal.
PA-SIDE CAMERA IMAGE SIG [OK/NG]	Indicates condition of camera image signal.
ILL [ON/OFF]	Indicates condition of illumination signal.
TURN SIGNAL [ON/OFF]	Indicates condition of turn signal.

WORK SUPPORT

Support Item	Setting	Description
CALIBRATING CAMERA IMAGE (FRONT CAMERA)	STATUS	Performs calibration of front camera.
	AXIS X
	AXIS Y
	ROTATE
CALIBRATING CAMERA IMAGE (PASS-SIDE CAMERA)	STATUS	Performs calibration of passenger side camera.
	AXIS X
	AXIS Y
	ROTATE
CALIBRATING CAMERA IMAGE (DR-SIDE CAMERA)	STATUS	Performs calibration of driver side camera.
	AXIS X
	AXIS Y
	ROTATE
CALIBRATING CAMERA IMAGE (REAR CAMERA)	STATUS	Performs calibration of rear view camera.
	AXIS X
	AXIS Y
	ROTATE
FINE TUNING OF BIRDS-EYE VIEW	STATUS	Confirmation and adjustment of difference between each camera can be performed.
	SELECT
	AXIS X
	AXIS Y
	ROTATE
REAR WIDE-VIEW FIXED GUIDE LINE CORRECTION	STATUS	Correct rear wide-view fixed guide line positions.
	AXIS X
	AXIS Y
	PATTERN
NON-VIEWABLE AREA REMINDER	ON	ON/OFF setting of non-viewable area can be performed.
NON-VIEWABLE AREA REMINDER	OFF	ON/OFF setting of non-viewable area can be performed.
PREDICTIVE COURSE LINE DISPLAY	ON	ON/OFF setting of predictive course line display can be performed.
PREDICTIVE COURSE LINE DISPLAY	OFF
INITIALIZE CAMERA IMAGE CALIBRATION	—	Factory image calibration restoration can be performed.
STEERING ANGLE SENSOR ADJUSTMENT	—	Steering angle sensor neutral position adjustment can be performed.
CAUSE OF ENTRY CANCEL	—	Cause item can be cancelled.
MOD FUNCTION	ON	ON/OFF setting of moving object detection (MOD) can be performed.
MOD FUNCTION	OFF

CONFIGURATION

Refer to Description.

CAN DIAG SUPPORT MNTR

Refer to CAN Diagnostic Support Monitor.

System

System Description SYSTEM DIAGRAMAround View Monitor Control Unit Input Signal (CAN Communication)Transmit unitSignal name ABS actuator and electrical unit (Control unit) Wheel speed signal Audio unit Camera switch signal BCM Door switches state signal Combination meter Setting change request signal Hand brake switch signal IPDM E/R Battery voltage signal Sonar control unit Sonar detection display request signal Steering angle sensor Steering angle signal TCM Transmission range indication signal DESCRIPTION This system is equipped with wide-angle cameras on the front, rear and right and left door mirrors...

Diagnosis System (audio Unit)

D..

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Noise, Vibration and Harshness (nvh) Troubleshooting

N..

Nissan Murano (Z52) 2015-2024 Service Manual: Component Parts. Heated Steering Wheel System