Nissan Murano: System Description / System

Component Parts. Exterior Lighting System

Component Parts Location A. RH side of instrument panel B. Front combination lamp (view with front combination lamp removed) C. Engine compartment LH side D...

Headlamp System

System Description SYSTEM DIAGRAMSignal transmission function list Signal name Input Output Description Combination switch signal Combination switch (lighting and turn signal switch) BCM Transmits the combination switch signal to the BCM...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Wiper and Washer System Symptoms

Symptom Table CAUTION: Perform the “Self Diagnostic Result” with Consult before performing the diagnosis by symptom. Perform the diagnosis by DTC if DTC is detected. Symptom Probable malfunction location Inspection item Front wiper does not operate in ...

Nissan Murano (Z52) 2015-2024 Service Manual: B2401 Ign Open

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detecting condition B2401–86 IGN OPEN (Ignition open) Diagnosis condition All times Signal (terminal) Ignition switch ON signal (CAN communication) Threshold When all of the following conditions are satisfied CAN communication is normal Automatic back door control module receives wake up signal via CAN communication with BCM Automatic back door control module cannot detect ignition switch ON signal via CAN communication with IPDM E/R Diagnosis delay time – B2401–87 IGN OPEN (Ignition open) Diagnosis condition All times Signal (terminal) CAN communication Threshold When automatic back door control module can not communicate CAN communication signal Diagnosis delay time 2 seconds POSSIBLE CAUSE CAN communication system BCM IPDM E/R Automatic back door control module FAIL-SAFEInhibit automatic back door system auto open/close function DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...