Other information:
Inspection
BOOTCheck boot for cracks. Replace if any damage is found.OUTER SOCKET AND INNER SOCKET
Ball joint swinging torque
Hook the Tool at the measuring point and pull the Tool. Make sure that the Tool reads the specified value when ball stud and inner socket start to move...
Diagnosis Procedure
CHECK HARNESS CONTINUITY (OPEN CIRCUIT)
Turn the ignition switch OFF.
Disconnect the battery cable from the negative terminal.
Disconnect the following harness connectors.
ECM
IPDM E/R
ABS actuator and electric unit (control unit)
Check the continuity between the IPDM E/R harness connector and the ABS actuator and electric unit (control unit) harness connector...