Nissan Murano: System / Power Seat System

Nissan Murano (Z52) 2015-2024 Service Manual / Body Interior / Seat :: System Description / System / Power Seat System

System Description

DESCRIPTION

Power seat can be operated only with ignition ON or during retained power operation.

Sliding Operation

While operating the sliding switch located in power seat switch, the sliding motor operates and makes the seat front and back position adjustment possible.

Reclining Operation

While operating the reclining switch located in power seat switch, the reclining motor operates and makes the seat back forward and backward position adjustment possible.

Lifting Operation (Front Seat LH)

While operating the lifting switch located in power seat switch LH, the lifting motor (front) and lifting motor (rear) operate and make the seat cushion up and down position adjustment possible.

Climate Controlled Seat System

System Description SYSTEM DIAGRAMSignal transmission function list Signal name Input Output Description Climate controlled seat switch operation signal Climate controlled seat switch LH Climate controlled seat switch RH Climate controlled seat control unit LH Climate controlled seat control unit RH Transmits the climate controlled seat switch operation signal to the climate controlled seat control unit...

Lumbar Support System

System Description DESCRIPTION Lumbar support can operate regardless of the ignition switch status, because power supply is always supplied to lumber support switch (with automatic drive positioner)...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Push-Button Ignition Switch Circuit

Component Function Check CHECK FUNCTION CONSULT Select “PUSH SW” in “Data Monitor” mode of “BCM(INTELLIGENT KEY)". Check the push-button ignition switch signal under the following conditions: Test item Condition Status PUSH SW Push-button ignition switch is pressed On Push-button ignition switch is not pressed Off Is the indication normal? YES>> Inspection End...

Nissan Murano (Z52) 2015-2024 Service Manual: Horn :: Removal and Installation. Horn

Exploded View 1. Horn (LOW) 2. Horn (HIGH) Removal and Installation REMOVALRemove the front grille. Refer to Removal and Installation. Disconnect the harness connectors from the horns (LOW, HIGH). NOTE: Note the wiring harness connectors location prior to removal...