Nissan Murano: System / Lumbar Support System
System Description
DESCRIPTION
-
Lumbar support can operate regardless of the ignition switch status, because power supply is always supplied to lumber support switch (with automatic drive positioner).
-
Lumbar support can operate with the ignition switch ON or during retained power operation (without automatic drive positioner).
-
While operating the lumbar support switch, lumbar support motor operates which allows forward and backward operation of seat back support.
System Description
DESCRIPTIONPower seat can be operated only with ignition ON or during retained power operation.Sliding OperationWhile operating the sliding switch located in power seat switch, the sliding motor operates and makes the seat front and back position adjustment possible...
System Description
DESCRIPTION
Heated seat system is activated by heated seat switch while ignition switch is ON, and has the function to warm seat cushion and seat back...
Other information:
Component Function Check
CHECK FUNCTION
CONSULT
Select “REQ SW-BD/TR” in “Data Monitor” mode of “BCM(INTELLIGENT KEY)”.
Check that the function operates normally according to the following conditions:
Monitor Item Condition Status
REQ SW-BD/TR
Back door request switch
Pressed
On
Released
Off
Is the inspection result normal?
YES>>
Back door request switch is OK...
Exploded View
1.
Door mirror glass
2.
Door mirror actuator
3.
Side camera (if equipped)
4.
Door mirror
5.
Door mirror rear finisher
6.
Door mirror corner finisher
7.
Side camera finisher (if equipped)
A.
Refer to Removal and Installation...