Nissan Murano: System / Climate Controlled Seat System
SYSTEM DIAGRAM
Signal transmission function list
| Signal name | Input | Output | Description |
|---|---|---|---|
| Climate controlled seat switch operation signal |
|
|
Transmits the climate controlled seat switch operation signal to the climate controlled seat control unit. |
| Indicator signal |
|
|
Activates/deactivates climate controlled seat switch indicator with the indicator signal. |
| Heater signal |
|
|
Activates/deactivates the seat heaters with the heater signal. |
| Heater temperature feedback signal |
|
|
Transmits the heater temperature feedback signal to the climate controlled seat control unit. |
| Blower signal |
|
|
Activates/deactivates the seat blowers with the blower signal. |
| Blower speed feedback signal |
|
|
Transmits the blower speed feedback signal to the climate controlled seat control unit. |
DESCRIPTION
-
The climate controlled seat system is controlled by the climate controlled seat control unit.
-
Operation of the climate controlled seat switch sends seat heater or ventilated airflow and adjusts the seat temperature.
SEAT CUSHION AND SEAT BACK TEMPERATURE ADJUSTMENT FUNCTION
-
A seat blower and seat heater are installed in the seat cushion and seat back for climate controlled seat heating and ventilation operation.
-
The seat heaters provide heating operation of the seat cushion and seat back. The seat heater’s temperature can be adjusted to either LO, MED, or HI in accordance with the climate controlled seat switch to provide different levels of climate controlled seat heating.
-
The seat blower provides ventilated seat operation of the seat cushion and seat back. The seat blower speed can be adjusted to either LO, MED, or HI in accordance with the climate controlled seat switch for different levels of climate controlled seat ventilation.
FAIL-SAFE
The fail-safe function is adopted for the climate controlled seat control unit. Refer to Fail-safe.
System
..
Power Seat System
System Description
DESCRIPTIONPower seat can be operated only with ignition ON or during retained power operation.Sliding OperationWhile operating the sliding switch located in power seat switch, the sliding motor operates and makes the seat front and back position adjustment possible...
Other information:
Nissan Murano (Z52) 2015-2024 Service Manual: P0131 A/f Sensor 1
DTC Description DTC DETECTION LOGICTo judge the malfunction, the diagnosis checks that the A/F signal computed by ECM from the A/F sensor 1 signal is not inordinately low.The A/F signal computed by ECM from the A/F sensor 1 signal is constantly approx...
Nissan Murano (Z52) 2015-2024 Owners Manual: Intelligent Driver Alertness system operation
If the system detects driver fatigue or that driver attention is decreasing, the message “Take a break?” appears in the vehicle information display and a chime sounds when the vehicle is driven at speeds above 37 mph (60 km/h). The system continuously monitors driver attention and can provide multiple warnings per trip...
Categories
- Manuals Home
- Nissan Murano Owners Manual
- Nissan Murano Service Manual
- Checking engine oil level
- GAS STATION INFORMATION
- Vehicle Dynamic Control (VDC) OFF switch
- New on site
- Most important about car
Unfastening the seat belts. Checking seat belt operation
Unfastening the seat belts
To unfasten the seat belt, press the button
on the buckle 
. The seat belt
automatically
retracts.
