Other information:
Diagnosis Procedure
CHECK CONNECTOR
Turn the ignition switch OFF.
Disconnect the battery cable from the negative terminal.
Check the following terminals and connectors for damage, bend and loose connection (unit side and connector side).
AV control unit (With navigation system)
Audio unit (Without navigation system)
3CH CAN gateway
Is the inspection result normal?
YES>>
GO TO 2...
Diagnosis Procedure
AWD warning icon/display (AWD Error: See Owner′s Manual) is displayed on information display after the engine started.SELECT SELF DIAGNOSTIC RESULT
CONSULT
Select “Self Diagnostic Result” mode of “ALL MODE AWD/4WD”.
Is any DTC detected?
YES>>
Check the DTC...