Nissan Murano: Symptom Diagnosis / The System Operates Even When Using Turn Signal

Nissan Murano (Z52) 2015-2024 Service Manual / Cruise Control & Driver Assistance / Driver Assistance System :: Driver Assistance System / Symptom Diagnosis / The System Operates Even When Using Turn Signal

Diagnosis Procedure

The warning of Lane Departure Warning (LDW) and Intelligent Lane Intervention (I-LI) and the yaw moment control are activated during the use of a turn signal.

NOTE:

For the operational conditions of Lane Departure Warning (LDW) and Intelligent Lane Intervention (I-LI), refer to the following descriptions.

  • LDW: Refer to System Description.

  • I-LI: Refer to System Description.

CHECK TURN SIGNAL OPERATION

Check that both right and left turn signals are normal.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace malfunctioning parts. Refer to Symptom Table

CHECK SELF-DIAGNOSIS RESULTS

CONSULT

  1. Perform “All DTC Reading”.

  2. Check if any DTC is detected in “Self Diagnosis Result” of “ICC/ADAS”.

Is any DTC detected?

YES>>

Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.

NO>>

Replace ADAS control unit. Refer to Removal and Installation.

    The System Does Not Operate Even When Using Turn Signal

    Diagnosis Procedure CHECK TURN SIGNAL OPERATION Check that both right and left turn signals are normal. Is the inspection result normal? YES>> GO TO 2...

    Normal Operating Condition

    Description PRECAUTIONS FOR INTELLIGENT FORWARD COLLISION WARNING (I-FCW)Refer to Precautions for Intelligent Forward Collision Warning.PRECAUTIONS FOR LANE DEPARTURE WARNING (LDW)Refer to Precautions for Lane Departure Warning...

    Other information:

    Nissan Murano (Z52) 2015-2024 Service Manual: C1b00-04 Camera Unit Malf


    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition C1B00-04 CAMERA UNIT MALF (Camera unit malfunction) Diagnosis condition When ignition switch is ON. Signal (terminal) - Threshold Configuration of the lane camera unit is not completed...

    Nissan Murano (Z52) 2015-2024 Service Manual: C1a01 Power Supply Circuit 1


    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition C1A01–16 POWER SUPPLY CIR 1 (Power supply circuit) Diagnosis condition When Ignition switch is ON. Signal (terminal) — Threshold The battery voltage sent to distance sensor (ICC sensor) remains less than 8...

    Categories

    Autolight system

    Nissan Murano. Autolight system

    The autolight system allows the headlights to turn on and off automatically. The autolight system can:

    Turn on the headlights, front parking, tail, license plate and instrument panel lights automatically when it is dark. Turn off all the lights (except daylight running lights) when it is light. Keep all the lights on for a period of time after you place the ignition switch in the OFF position and all doors are closed.

    read more

     
    Copyright © 2026 www.nimurano.com