Nissan Murano: Body Exterior, Doors, Roof & Vehicle Security / Roof :: Dtc/circuit Diagnosis

Inspection and Adjustment. Additional Service When Replacing Control Unit

Special Repair Requirement INITIALIZATION PROCEDUREMoonroof/SunshadeIf the moonroof does not open or close automatically, use the following procedure to return moonroof operation to normal: Ignition switch ON...

Power Supply and Ground Circuit

..

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: U1232 Steering Angle Sensor

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition U1232 ST ANGLE SEN CALIB (Steering angle sensor calibration) Diagnosis condition When ignition switch is ON Signal (terminal) — Threshold — Diagnosis delay time — POSSIBLE CAUSE Neutral position adjustment of the steering angle sensor is incomplete Steering angle sensor FAIL-SAFEPredictive course line is not displayed DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...

Nissan Murano (Z52) 2015-2024 Owners Manual: High Beam Assist (if so equipped)

The High Beam Assist system will operate when the vehicle is driven at speeds of approximately 25mph(40 km/h) and above. If an oncoming vehicle or leading vehicle appears in front of your vehicle when the headlight high beam is on, the headlight will be switched to the low beamautomatically...