Nissan Murano: Roof :: Dtc/circuit Diagnosis / Power Supply and Ground Circuit

Nissan Murano (Z52) 2015-2024 Service Manual / Body Exterior, Doors, Roof & Vehicle Security / Roof :: Dtc/circuit Diagnosis / Power Supply and Ground Circuit

Moonroof Motor Assembly

Description BCM supplies the moonroof motor assembly with power. CPU is integrated in moonroof motor assembly. Tilts up/down & slides open/close by moonroof switch operation...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Seat Belt Indctr Lamp Is On, Pass Air Bag Indctr Is on or Off

Diagnosis Procedure Vehicle conditions: Seat belt indicator lamp is ON, passenger air bag indicator lamp is ON or OFF. Passenger seat is unoccupied. Driver seat belt is buckled. Front seat belt buckle switch RH harness and front seat belt buckle switch RH are OK (buckle passenger seat belt to check if seat belt indicator lamp turns OFF, driver seat belt needs to be buckled)...

Nissan Murano (Z52) 2015-2024 Service Manual: How to Read Wiring Diagrams

Connector Symbols Most connector symbols in wiring diagrams are shown from the terminal side. Connector symbols shown from the terminal side are enclosed by a single line and followed by the direction mark. Connector symbols shown from the harness side are enclosed by a double line and followed by the direction mark...

Categories

LATCH (Lower Anchors and Tethers for CHildren) system

Nissan Murano. LATCH (Lower Anchors and Tethers for CHildren) system

LATCH system lower anchor locations - bench seat

Your vehicle is equipped with special anchor points that are used with LATCH system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint unless the combined weight of the child and child restraint exceeds 65 lbs. (29.5 kg). If the combined weight of the child and child restraint is greater than 65 lbs. (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.