Other information:
System Description
SYSTEM DIAGRAMINPUT/OUTPUT SIGNAL CHART Item Input signal to main power window and door lock/unlock switch Main power window and door lock/unlock switch function Actuator
Encoder
Encoder pulse signal
Power window control
Front power window motor
Main power window and door lock/unlock switch
Front power window motor LH UP/DOWN signal
Power window and door lock/unlock switch RH
Front power window motor RH UP/DOWN signal
BCM
RAP signal
Rear power window switch
Rear power window motor UP/DOWN signal
Rear power window motor
POWER WINDOW OPERATION
Power window system is activated by the power window switches when ignition switch ON position or during the retained power operation after ignition switch OFF...
Work Procedure
DescriptionAlways adjust the camera aiming after removing and installing or replacing the lane camera unit.CAUTION:
Place the vehicle on level ground when the camera aiming adjustment is operated.
Be sure to place the target correctly according to work procedures because the system may not operate normally...