Nissan Murano: Heater & Air Conditioning Control System :: Basic Inspection / Configuration (hvac)

Description

Vehicle specification needs to be written with CONSULT because it is not written after replacing A/C auto amp.

Configuration has three functions as follows:

CAUTION:

• When replacing A/C auto amp., you must perform “WRITE CONFIGURATION” with CONSULT.

• Never perform “WRITE CONFIGURATION” except for new A/C auto amp.

WRITING MODE SELECTION

CONSULT

Select “CONFIGURATION” mode of "HVAC".

GO TO 2.

GO TO 3.

PERFORM “WRITE CONFIGURATION - Config file”

CONSULT

Perform “WRITE CONFIGURATION - Config file”.

Work End.

PERFORM “MANUAL CONFIGURATION”

CONSULT

Select “MANUAL CONFIGURATION” to write Nissan Murano vehicle specifications into the A/C auto amp.

CAUTION:

• Thoroughly read and understand the Nissan Murano vehicle specification. Incorrect settings may result in abnormal control of ECU.

• Make sure to select “NEXT” even if the default settings displayed on the CONSULT are the desired settings. If “NEXT” is not selected, the configuration process will be incomplete.

NOTE:

If manual configuration items are not displayed, select “NEXT”.

GO TO 4.

OPERATION CHECK

Confirm that each function controlled by A/C auto amp. operates normally.

Work End.