Other information:
DTC Description
DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC Detection Condition
B2195
ANTI-SCANNING
(Anti-scanning)
Diagnosis condition
When ignition switch ON.
Signal (terminal)
—
Threshold
ID verification between BCM and ECM that is out of the designated specification is detected
Diagnosis delay time
—
POSSIBLE CAUSEID verification request out of the designated specificationFAIL-SAFEInhibit engine cranking
DTC Confirmation Procedure
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON...
Component Inspection
NOTE:
If equipped with ADP, refer to Component Function Check (for select switch) or Component Function Check (for mirror switch).
CHECK MIRROR SWITCH & SELECT SWITCH
Ignition switch OFF.
Disconnect door mirror remote control switch connector...