Nissan Murano: Roof :: Symptom Diagnosis / Moonroof Does Not Operate Properly
Diagnosis Procedure
CHECK BCM POWER SUPPLY AND GROUND CIRCUIT
Check BCM power supply and ground circuit.
Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace malfunctioning parts.
CHECK MOONROOF MOTOR ASSEMBLY POWER SUPPLY AND GROUND CIRCUIT
Check moonroof motor assembly power supply and ground circuit.
Refer to Component Function Check.
Is the inspection result normal?
YES>>
Check intermittent incident. Refer to Intermittent Incident.
NO>>
Repair or replace malfunctioning parts.
Diagnosis Procedure
CHECK BCM POWER SUPPLY AND GROUND CIRCUIT
Check BCM power supply and ground circuit.
Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>
GO TO 2...
Other information:
Inspection
OIL LEAKAGEMake sure that oil is not leaking from final drive assembly or around it.OIL LEVELCheck oil level from filler plug mounting hole as shown in the figure after removing filler plug (1) and gasket from final drive assembly.
CAUTION:
Turn the ignition switch OFF while checking oil level...
Component Function Check
DATA MONITOR
CONSULT
Select “MEMORY SW 1”, “MEMORY SW 2” and “SET SW” in “Data Monitor” mode of “AUTO DRIVE POS.”.
Check that the function operates normally according to the following conditions:
Monitor item Condition Status
MEMORY SW 1
Memory switch 1
Push
ON
Release
OFF
MEMORY SW 2
Memory switch 2
Push
ON
Release
OFF
SET SW
Set switch
Push
ON
Release
OFF
Is the inspection result normal?
YES>>
Inspection End...