Nissan Murano: Monitor, climate, audio, phone and voice recognition systems / Intelligent Around View Monitor (if so equipped)

Nissan Murano (Z52) 2015-2024 Owners Manual / Monitor, climate, audio, phone and voice recognition systems / Intelligent Around View Monitor (if so equipped)

Nissan Murano. Intelligent Around View Monitor (if so equipped)

CAMERA button

WARNING

Failure to follow the warnings and instructions for the proper use of the Intelligent Around View Monitor system could result in serious injury or death.
The Intelligent AroundView Monitor is a convenience feature and is not a substitute for proper vehicle operation because it has areas where objects cannot be viewed. The four corners of the vehicle in particular, are areas where objects do not always appear in the bird’s-eye, front, or rear views. Always check your surroundings to be sure that it is safe to move before operating the vehicle. Always operate the vehicle slowly.
The driver is always responsible for safety during parking and other maneuvers.

CAUTION

Do not scratch the camera lens when cleaning dirt or snow from the front of the camera.

The Intelligent Around View Monitor system is designed as an aid to the driver in situations such as slot parking or parallel parking.

The monitor displays various views of the position of the vehicle in a split screen format. Not all views are available at all times.

Available views:

Front View
An approximately 150–degree view of the front of the vehicle.
Rear View
An approximately 150–degree view of the rear of the vehicle.
Bird’s-Eye View
The surrounding views of the vehicle from above.
Front-Side View
The view around and ahead of the front passenger’s side wheel.
Full Screen Rear View
The view to the rear of the vehicle (which is a little wider than the standard Rear View).

Nissan Murano. Intelligent Around View Monitor (if so equipped)

To display the multiple views, the Intelligent Around View Monitor system uses cameras located in the front grille, on the vehicle’s outside mirrors and one just above the vehicle’s license plate Nissan Murano. Intelligent Around View Monitor (if so equipped) .

System maintenance

CAUTION Do not use alcohol, benzine or thinner to clean the camera. This will cause discoloration. Do not damage the camera as the monitor screen may be adversely affected...

Intelligent Around View Monitor system operation

With the ignition switch in the ON position, move the shift lever to the R (Reverse) position or press the CAMERA button to operate the Intelligent Around View Monitor...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: U0104-82 Adas Can 1

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition U0104-82 ADAS CAN CIR1 (ADAS control unit CAN circuit 1) Diagnosis condition When ignition switch is ON. Signal (terminal) – Threshold Side radar detected an error of ITS communication signal that was received from ADAS control unit Diagnosis delay time – POSSIBLE CAUSE ADAS control unit Side radar RH FAIL-SAFEThe following systems are canceled: Blind Spot Warning (BSW) Rear Cross Traffic Alert (RCTA) DTC Confirmation Procedure CHECK DTC PRIORITY If DTC “U0104-82” is displayed with DTC “U1000-01”, first diagnose the DTC “U1000-01”...

Nissan Murano (Z52) 2015-2024 Owners Manual: How to change the set vehicle speed

To cancel the preset speed, use one of the following methods: Push the CANCEL switch. The set vehicle speed indicator will go out. Tap the brake pedal. The set vehicle speed indicator will go out. If the Cruise Control Alerts are enabled in the Driver Assistance menu, the “Cruise ON: Press SET to engage speed control” message will reappear in the vehicle information display to let you know the cruise control system is still on if you set the target speed again...