Nissan Murano: Removal and Installation / Front Auxiliary Input Jacks Control Unit
Removal and Installation
Removal
Remove A/C switch assembly Removal and Installation.
Disconnect the harness connectors from the front auxiliary input jacks control unit.
Remove the front auxiliary input jacks control unit.
Installation
Installation is in the reverse order of removal.
Exploded View
1.
Steering wheel
2.
Cover
3.
Steering switches
4.
Driver air bag module
A.
Refer to Exploded View.
Pawl
Removal and Installation
REMOVALNOTE:
The steering switches is serviced as an assembly...
Removal and Installation
REMOVALRemove shift selector finisher. Refer to Exploded View.
Release pawls and remove front auxiliary input jacks (1).
: PawlINSTALLATIONInstallation is in the reverse order of removal...
Other information:
Component Function Check
CHECK FUNCTION
CONSULT
Select “TOUCH SEN RH” in “Data Monitor” mode of “AUTO BACK DOOR”.
Check that the function operates normally according to the following conditions:
Monitor Item Condition Status
TOUCH SEN RH
Touch sensor RH
Other than below
OFF
Detect obstruction
ON
Is the inspection result normal?
YES>>
Touch sensor RH is OK...
Diagnosis Procedure
WARNING:
Before servicing, turn ignition switch OFF, disconnect battery negative terminal, and wait 3 minutes or more. (To discharge backup capacitor.)
Never use unspecified tester or other measuring device.
CHECK CONNECTOR
Turn the ignition switch OFF...
Categories

Your vehicle has two types of security systems:
Vehicle security system
NISSAN Vehicle Immobilizer System
The vehicle security system provides visual
and audible alarm signals if someone
opens the doors, liftgate or the hood when
the system is armed. It is not, however, a
motion detection type system that activates
when a vehicle is moved or when a
vibration occurs.
read more