Repair of Rust and Corrosion
Rust on sheet metal is the result of the chemical reaction of steel to oxygen in the air, which is called oxidation. This rust, if left untreated, will increase and finally corrode and damage the sheet metal...
Other information:
Component Function Check
NOTE:
The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information.
Check Intelligent Key relative signal strength.
Confirm Nissan Murano vehicle Intelligent Key antenna signal strength...
Values on the Diagnosis Tool
NOTE:
The following table includes information (items) inapplicable to this Nissan Murano vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
CONSULT MONITOR ITEM Monitor Item Condition Value/Status
STARTER SW
Ignition position
Cranking
ON
Other than above
OFF
SET SW
Set switch
Push
ON
Release
OFF
MEMORY SW 1
Memory switch 1
Push
ON
Release
OFF
MEMORY SW 2
Memory switch 2
Push
ON
Release
OFF
DETENT SW
CVT selector lever
P position
OFF
Other than above
ON
STEERING STATUS
Power supply position of BCM
LOCK
LOCK
Other than the above
UNLOCK
SLIDE SW–FR
Sliding switch (forward)
Operate
ON
Release
OFF
SLIDE SW–RR
Sliding switch (backward)
Operate
ON
Release
OFF
RECLN SW–FR
Reclining switch (forward)
Operate
ON
Release
OFF
RECLN SW–RR
Reclining switch (backward)
Operate
ON
Release
OFF
LIFT FR SW–UP
Lifting switch front (upward)
Operate
ON
Release
OFF
LIFT FR SW–DN
Lifting switch front (downward)
Operate
ON
Release
OFF
LIFT RR SW–UP
Lifting switch rear (upward)
Operate
ON
Release
OFF
LIFT RR SW–DN
Lifting switch rear (downward)
Operate
ON
Release
OFF
TILT SW-UP
Tilt switch
Upward
ON
Other than above
OFF
TILT SW-DOWN
Tilt switch
Downward
ON
Other than above
OFF
TELESCO SW-FR
Telescopic switch
Forward
ON
Other than above
OFF
TELESCO SW-RR
Telescopic switch
Backward
ON
Other than above
OFF
MIR CON SW–UP
Mirror switch
Up
ON
Other than above
OFF
MIR CON SW–DN
Mirror switch
Down
ON
Other than above
OFF
MIR CON SW–RH
Mirror switch
Right
ON
Other than above
OFF
MIR CON SW–LH
Mirror switch
Left
ON
Other than above
OFF
MIR CHNG SW–R
Select switch
Right
ON
Other than above
OFF
MIR CHNG SW–L
Select switch
Left
ON
Other than above
OFF
TILT PULSE
Tilt position
Upward
The numeral value decreases *
Downward
The numeral value increases *
Other than above
No change to numeral value*
TELESCO PULSE
Telescopic position
Forward
The numeral value decreases *
Backward
The numeral value increases *
Other than above
No change to numeral value*
MIR/SEN RH U–D
Door mirror RH
Change between 3...