Other information:
Fusible Link
A melted fusible link can be detected either by visual inspection or by feeling with a finger tip. If its condition is questionable, use circuit tester or test lamp. 1
: Fusible link
CAUTION:
If fusible link should melt, it is possible that critical circuit (power supply or large current carrying circuit) is shorted...
Diagnosis Procedure
CHECK INTAKE MODE DOOR MOTOR POWER SUPPLY
Ignition switch ON.
Check voltage between intake mode door motor harness connector and ground.
+ −
Voltage
(Approx.)
Intake mode door motor
Connector Terminal
M153
1
Ground
Battery voltage
Is the inspection result normal?
YES>>
GO TO 2...