Nissan Murano: Vehicle-to-vehicle distance control mode switches / Vehicle-to-vehicle distance control mode display and indicators

The display is located between the speedometer
and tachometer.
- This indicator indicates the ICC system
status depending on a color:
- ICC systemONindicator (gray): Indicates
that the CRUISE ON/OFF is on.
- ICC system SET indicator (green):
Indicates that the cruising speed is
set.
- ICC system warning (yellow): Indicates
that there is a malfunction in
the ICC system.
- Set vehicle speed indicator:
Indicates the set vehicle speed.
For Canadian models, the speed is displayed
in km/h.
- Vehicle ahead detection indicator:
Indicates whether it detects a vehicle
in front of you.
- Set distance indicator:
Displays the selected distance between
vehicles set with the distance
switch.
The system is operated by the CRUISE
ON/OFF switch and four control switches,
all mounted on the steering wheel.
CANCEL switch:Deactivates the system without erasing
the set speed...
To turn on the cruise control, quickly push
and release the CRUISE ON/OFF switch .
The ICC system ON indicator (gray), set distance
indicator and set vehicle speed indicator
come on in a standby state for
setting...
Other information:
Description
Always perform the Intelligent Drive Alertness (I-DA) system action test to check that the system operates normally after replacing the around view monitor control unit and any Intelligent Drive Alertness (I-DA) system malfunction.WARNING:
Be careful of traffic conditions and safety around the vehicle when performing road test...
Diagnosis Procedure
When the ignition switch is placed ON, the low tire pressure warning lamp blinks. And then 1 minute later, low tire pressure warning lamp turns ON.NOTE:
The position of an inactive tire pressure sensor can be identified by checking the blinking timing of the low tire pressure warning lamp...