Nissan Murano: Door & Lock :: System Description / System (intelligent Key System)

Nissan Murano (Z52) 2015-2024 Service Manual / Body Exterior, Doors, Roof & Vehicle Security / Door & Lock :: System Description / System (intelligent Key System)

System (power Door Lock System)

System Description SYSTEM DIAGRAMINPUT SIGNAL AND OUTPUT SIGNAL Signal name Input Output Description Door lock/unlock switch signal Door lock/unlock switch BCM The BCM receives door lock/unlock switch signals inputs and activates the actuators accordingly...

Intelligent Key System

System Description SYSTEM DIAGRAMINPUT SIGNAL AND OUTPUT SIGNAL Signal name Input Output Description Key ID signal Remote keyless entry receiver BCM The BCM receives key ID signal inputs and activates the actuators accordingly...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: C1116 Stop Lamp Switch

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen item (Trouble diagnosis content) DTC detected condition C1116 STOP LAMP SW (Stop lamp switch) Diagnosis condition When ignition switch ON. When power supply voltage is normal. Signal (terminal) Stop lamp switch signal Threshold When a malfunction is detected in stop lamp switch signal...

Nissan Murano (Z52) 2015-2024 Owners Manual: Vehicle-to-vehicle distance control mode operation

The vehicle-to-vehicle distance control mode is designed to maintain a selected distance from the vehicle in front of you and can reduce the speed to match a slower vehicle ahead. The system will decelerate the vehicle as necessary and if the vehicle ahead comes to a stop, the vehicle decelerates to a standstill...

Categories

LATCH (Lower Anchors and Tethers for CHildren) system

Nissan Murano. LATCH (Lower Anchors and Tethers for CHildren) system

LATCH system lower anchor locations - bench seat

Your vehicle is equipped with special anchor points that are used with LATCH system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint unless the combined weight of the child and child restraint exceeds 65 lbs. (29.5 kg). If the combined weight of the child and child restraint is greater than 65 lbs. (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.