Nissan Murano: System (intelligent Key System) / Key Reminder Function

Nissan Murano (Z52) 2015-2024 Service Manual / Body Exterior, Doors, Roof & Vehicle Security / Door & Lock :: System Description / System (intelligent Key System) / Key Reminder Function

System Description

SYSTEM DIAGRAM

INPUT SIGNAL AND OUTPUT SIGNAL

Signal name	Input	Output	Description
Key ID signal	Remote keyless entry receiver	BCM	The BCM receives key ID signal inputs and activates the actuators accordingly.
Inside key antenna signal	Inside key antenna	BCM	The BCM receives inside key antenna signals inputs and activates the actuators accordingly.
Door switch signal	Door switch	BCM	The BCM receives door switch signals inputs and activates the actuators accordingly.
Driver side door lock/unlock status signal	Unlock sensor	BCM	The BCM receives diver side door lock/unlock status signal inputs and activates the actuators accordingly.
Back door open request signal	BCM	Automatic back door control module (CAN)	The BCM receives back door open request signal inputs and activates the actuators accordingly.

SYSTEM DESCRIPTION

Key reminder is the function that prevents the key from being left in the vehicle.

Key reminder has the following 3 functions:

Key reminder function	Operation condition	Operation
Driver door is closed*.	Right after driver door is closed under the following conditions: Door lock operation is performed. Driver side door is open. Driver side door is in lock state.	All doors (except back door) and fuel filler lid unlock.
Door is open or closed.	Right after all doors are closed under the following conditions: Intelligent Key is inside the Nissan Murano vehicle. Any door is open. All doors (except for back door) are locked by door lock and unlock switch or door lock knob.	All doors (except back door) and fuel filler lid unlock. Honk Intelligent Key warning buzzer.
Back door is closed.	Right after back door is closed under the following conditions: Intelligent Key is inside Nissan Murano vehicle. All doors (except for back door) are closed. All doors (except for back door) are locked.	All doors (except for back door) and fuel filler lid unlock. Back door can open with back door opener switch. Honk Intelligent Key warning buzzer.

Key reminder function

Operation condition

Operation

Driver door is closed*.

Right after driver door is closed under the following conditions:

Door lock operation is performed.
Driver side door is open.
Driver side door is in lock state.

All doors (except back door) and fuel filler lid unlock.

Door is open or closed.

Right after all doors are closed under the following conditions:

Intelligent Key is inside the Nissan Murano vehicle.
Any door is open.
All doors (except for back door) are locked by door lock and unlock switch or door lock knob.

All doors (except back door) and fuel filler lid unlock.
Honk Intelligent Key warning buzzer.

Back door is closed.

Right after back door is closed under the following conditions:

Intelligent Key is inside Nissan Murano vehicle.
All doors (except for back door) are closed.
All doors (except for back door) are locked.

All doors (except for back door) and fuel filler lid unlock.
Back door can open with back door opener switch.
Honk Intelligent Key warning buzzer.

*: If the door closing impact shocks the door lock knob or contacts against baggage, the door lock knob might activate the door locks accidentally but unlock operation is performed in these cases.

CAUTION:

The above function operates when the Intelligent Key is inside the Nissan Murano vehicle. However, there may be times when the Intelligent Key cannot be detected. This function does not operate when the Intelligent Key is on the instrument panel, rear parcel shelf or in the glove box. Also, this system sometimes does not operate if the Intelligent Key is in the door pocket of the open door.

Warning Function

System Description OPERATION DESCRIPTIONThe warning functions are as per the following items and are given to the user as warning information and warnings using combinations of Intelligent Key warning buzzer, combination meter buzzer, KEY warning lamp and information display in combination meter: Intelligent Key system malfunction OFF position warning P position warning Take away warning Door lock operation warning Engine start information Intelligent Key low battery warning Key ID warning Key ID verification information OPERATION CONDITIONOnce the following condition from below is established, alert or warning is executed: Warning/Information functions Operation procedure Intelligent Key system malfunction When a malfunction is detected on BCM, “KEY” warning lamp illuminates...

Remote Engine Start Function

System Description SYSTEM DIAGRAMOPERATIONRemote keyless entry system controls operation of the following items: Door lock/unlock function Selective unlock function Auto door lock function Hazard and horn reminder function Automatic back door open/close function Remote engine start INPUT SIGNAL AND OUTPUT SIGNAL Signal name Input Output Description Key ID signal Remote keyless entry receiver BCM The BCM receives key ID signal inputs and activates the actuators accordingly...

Other information:

Nissan Murano (Z52) 2015-2024 Owners Manual: On-pavement and off-road driving precautions

Utility vehicles have a significantly higher rollover rate than other types of vehicles. They have higher ground clearance than passenger cars to make them capable of performing in a variety of on-pavement and off-road applications. This gives them a higher center of gravity than ordinary vehicles...

Nissan Murano (Z52) 2015-2024 Service Manual: System. Awd System

System Description SYSTEM DIAGRAMINPUT SIGNAL AND OUTPUT SIGNALIt transmits/receives each signal from the following AWD control unit via CAN communication line: Component parts Function ABS actuator and electric unit (control unit) Transmits the following signals via CAN communication to AWD control unit: Nissan Murano Vehicle speed signal Stop lamp switch signal (brake signal) Yaw rate sensor signal Side G sensor signal Decel G sensor signal ECM Transmits the following signals via CAN communication to AWD control unit: Accelerator pedal position signal Engine speed signal TCM Transmits the following signals via CAN communication to AWD control unit: Input shaft revolutional signal CVT ratio signal Combination meter Transmits conditions of parking brake switch signal via CAN communication to AWD control unit...