Nissan Murano: Brake Control System :: Automatic Emergency Braking / System Description

Nissan Murano (Z52) 2015-2024 Service Manual / Brakes / Brake Control System :: Automatic Emergency Braking / System Description

Preparation. Preparation

Special Service Tools The actual shape of the tools may differ from those illustrated here. Tool number (TechMate No.) Tool name Description   — (1-20-2851-1) Radar Sensor Aiming kit* Adjusting distance and radar sensors NOTE: * Tools 1–20–2721–1–IF, 1–20–2722–1–IF and J-50808 have been superseded and are no longer available, but may still be used for distance sensor alignment...

Component Parts. Automatic Emergency Braking System

Component Parts Location A. Center of windshield behind the auto anti-dazzling inside mirror B. Center of instrument panel (view with center console removed) C...

Other information:

Nissan Murano (Z52) 2015-2024 Service Manual: Door Lock


CONSULT Function (BCM - DOOR LOCK) ECU IDENTIFICATIONThe BCM part number is displayed.SELF DIAGNOSTIC RESULTRefer to DTC Index.DATA MONITOR Monitor Item [Unit] Description REQ SW-DR [On/Off] Indicates condition of door request switch LH. REQ SW-AS [On/Off] Indicates condition of door request switch RH...

Nissan Murano (Z52) 2015-2024 Service Manual: B133a Avm Connection


DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B133A-8F AVM connection (Camera image signal) Diagnosis condition When ignition switch is ON. Signal (terminal) Camera image signal circuit (terminal 49) Threshold — Diagnosis delay time — POSSIBLE CAUSE Camera image signal circuit Around view monitor control unit AV control unit FAIL-SAFECamera image is inoperative DTC Confirmation Procedure PERFORM DTC CONFIRMATION PROCEDURE CONSULT Ignition switch ON...

Categories

LATCH (Lower Anchors and Tethers for CHildren) system

Nissan Murano. LATCH (Lower Anchors and Tethers for CHildren) system

LATCH system lower anchor locations - bench seat

Your vehicle is equipped with special anchor points that are used with LATCH system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system. With this system, you do not have to use a vehicle seat belt to secure the child restraint unless the combined weight of the child and child restraint exceeds 65 lbs. (29.5 kg). If the combined weight of the child and child restraint is greater than 65 lbs. (29.5 kg), use the vehicle’s seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation.

read more

 
Copyright © 2026 www.nimurano.com